• 0312 354 33 31 - 0549 357 70 70
  • info@fidanpnomatik.com

AIGNEP 55000 Serisi Plastik Ftingsler

Component Parts and Materials

Technopolymeric Body
Nickel-plated brass Body
Acetalic resin Collet
Nickel-plated brass Capsule
Steel aisi 301 Clamping washer
Technopolymeric Safety ring
NBR  Lip seal
NBR  O-ring
NBR  Thread packing

Connection Tubes Plastic tubes: PA6 - PA11 - PA12 - Polyethylene - *Polyurethane - PTFE - FEP - ecc.
*For Polyurethane hoses it is required a minimum hardness of 98 shore
Temperatures Minimum Temperature: -20 °C
Maximum temperature: +80 °C
Threads "Short" taper thread
Parallel gas in conformity with ISO 228 Class A
Metric in conformity with ISO R/262
Pressures Minimum pressure: -0.99 bar (-0.099 MPa)
Maximum pressure: 15 bar (1.5 MPa)
Fluids Compressed air
 Vacuum
Sizes Tube: from 4 up to 14
Thread: from M3 up to 1/2
5513000006
The 55000 series has been produced using innovative material such as last generation technopolymeric.
Thanks to the use of these new materials, we've been able to realise very light and safety fittings.
The use of thechnopolymeric fittings ensures to avoid dangerous eletrical phenomena and in case of overpressure there won't be any formation of splints. This is thanks to the materials features, they are ductile and not conductive.
50000aggraffaggio pinza_2012
The washer, made in stainless steel, ensures the perfect tube clamping with every kinds of materials without damage the surface.
The connection between the tube and the fitting ensures a total tightness even in severe conditions such as impact and vibrations.
The particular geometric shape of the seal ensures the perfect tightness even with vacuum.
50000anelli di tenuta_ITA_ING_2012
All of threads from this range (also the M3), have been equipped with tightening parts which allow the direct assembly of the fittings, reducing the installation time.
scheda tecnica 50000 con chiave
All the straight fittings, with "short" and parallel threads, can be assembled with Allen wrench and it is possible to use them in reduced spaces.
filettatureita

The "short" taper thread has been designed to offer the following advantages to the users:
- reduced overall lenght
- smaller hex dimension compared to the parallel threads
- to allow the assembly with different female threads both taper as well as parallel:

         - tapered NPT - NPTF
         - parallel ISO 7 - BSPP
         - tapered ISO 7 - BSPT  PT
         - parallel ISO 228 - BSP - PF

filettature2ita
- to ensure the right tightening also with surfaces not perfectly flat, without spot-facing, concave, convex and with different kinds of chamfers or radius.
serraggio1
Torque to Male Threads ISO-228 with OR
Measure  Recommended Torque Nm Breaking Torque Nm
M5 0.8 3.2
1/8 3 8
1/4 9 30
3/8 10 60
1/2 12 50
Breaking values may vary according to the item
serraggio2
Torque to Male Threads "Short"
Measure Recommended Minimum Torque Nm Recommended Max Torque Nm
1/8 5 7
1/4 5 7
3/8 5 7
1/2 5 7
Breaking values may vary according to the item